Product Unit: 1pc

[Cleaning method in manual mode]
(1) Use an electric shaver to treat the hair in the area to be cleaned. If the hair is not shaved cleanly, it will lead to burns and mechanical failure when irradiated.
② Clean the irradiation surface with a damp cotton or cotton swab. Cleaning should be done with the power off.
③ After inserting the plate into the main unit, insert the AC cord into the AC adapter. If the plate is not inserted, the power will not turn on, so be sure to insert it. The reading light flashes when the plug is connected to an outlet.
④ Press and hold the power button on the side of the main unit for 2 seconds or more to turn on the power.
⑤ When the power is turned on, the reading light stops blinking and the LCD screen is displayed.
・Default setting for waste hair care mode: BODY level 1
・Default setting for beautiful skin mode: FACE level 1
⑥Please wear sunglasses before irradiation to protect your eyes.
⑦ Place the irradiation surface vertically so that it adheres to the skin you want to irradiate. The reading light will turn on when it is in close contact with the skin, so please check that it is lit before pressing the irradiation button. If you want to adjust the irradiation level, you can adjust the irradiation level by pressing the power button on the side of the main unit.
⑧ After cleaning, leave the power on for 1 minute, then press and hold the power button to turn off the power.
The reading light flashes when the power is turned off. Make sure the fan has completely stopped and unplug it from the electrical outlet

*Do not replace the plate while the power is on. Leave the power on for 1 minute, then turn off the power and wait until it stops working before replacing it.
*The power will automatically turn off after 10 minutes without any operation.
*For details, please refer to the instruction manual.